Illuminations and Accessories for Stereomicroscopes

Illuminations and Accessories for Stereomicroscopes

The Leica LED5000 / Leica LED3000 family is also fully integrated into the complete system of stereomicro¬scopes and accessories from Leica Microsystems Focusing columns with integrated electronics connect all digital signals and send them to Leica Application Suite software.

To view pricing, add to cart and log in.
Contact Us for a quote
Category:

Description

The Leica LED5000 / Leica LED3000 family is also fully integrated into the complete system of stereomicro¬scopes and accessories from Leica Microsystems Focusing columns with integrated electronics connect all digital signals and send them to Leica Application Suite software.

Leica Led3000 Rl

Led5000 Rl

Leica LED3000 RL & LED5000 RL

The light is arranged in a ring around the objective and shines down onto the sample. Illuminate from defined segments or uniformly, depending on the properties of the sample

Leica Spotlight

Gooseneck Illumination

Leica Spotlight | Gooseneck illumination

The Leica LED3000 SLI and Leica LED5000 SLI each feature two bright LED spotlights, which can be individually adjusted to the sample with two goosenecks. The control element is mounted on a separate gooseneck and can be placed in any position.

Leica Led3000 Nvi

Leica Led5000 Nvi

Leica LED3000 NVI & Leica LED5000 NVI

The Leica LED3000 NVI is ideal for viewing recesses and holes, since the light falls almost vertically on the sample. In contrast to coaxial illumination it is also ideally suited for non-reflective and uneven sample Surface. NVI illumination shines almost straight down onto the sample plane. This allows cavities and recesses to be very well illuminated. The Leica NVI is installed between the microscope carrier and the objectives

Leica Led3000 Mci

Leica Led5000 Mci

Leica LED3000 MCI & Leica LED5000 MCI

The unique Leica MCI (Multi Contrast Illumination) systems are ideal for applications that previously required goosenecks. The flat angle of the oblique incident light creates particularly high contrast for precise viewing of even the smallest uneven surfaces and defects such as scratches and dust particles. the settings are fully reproducible. Using Leica Application Suite software and Leica SmartTouch™ control, you can quickly and easily recall stored illumination parameters at any time using the Leica LED5000 MCI.

Leica Led5000 Cxi1

Leica Led5000 Cxi2

Leica LED5000 CXI

The Leica LED5000 CXI coaxial illuminator is used for quality control of flat, polished, or reflective samples. Scratches, cracks, impurities, and pores are made exceptionally visible. With coaxial illumination, light is coupled directly into a beam path and reflected into another beam path by the flat sample. Uneven areas and scratches do not reflect this light and become visually emphasized.

Leica Led3000 Bli1

Leica Led3000 Bli2

Leica LED3000 BLI

For transmitted light applications. The Leica LED3000 BLI makes it easy to equip a microscope system with transmitted light. The illuminator can be combined with standard baseplates or even used as a standalone instrument. The intuitive touch panel and large work surface make it exceptionally easy to use.

Leica Led3000 Di

Leica Led5000 Hdi

Leica LED3000 DI & Leica LED5000 HDI

Diffused illumination gives uniform illumination without shadow and glare effects. The Leica LED3000 DI and LED5000 HDI are ideal for documenting samples that are difficult to illuminate using other methods.

LEICA LED3000 DI

– Increased sample accessibility
– Perfect positioning flexibility using the gooseneck
– Separate gooseneck with control element
– Ideal for combination with ring light or spotlight illuminators

LEICA LED5000 HDI

– Diffused all-around illumination suppresses reflections and shading
– Stray light/ambient light is eliminated
– Constant illumination intensity
– Easy access to the sample for realignment

Transmitted Light Bases TL3000 Ergo & TL5000 Ergo

Tl3000

TL3000 Ergo for manual routines with large fields of view

TL3000 Ergo from Leica stands for intuitive manual operation. Effortlessly pass through the different contrast options: brightfield, Rottermann contrast, or one-sided darkfield. Fine-tuning of the contrast is easy, and all with just a single knob.

The base is fully coded and compatible with Leica software, so all important imaging parameters are saved with your images. This allows you to use the store & recall function of LAS and LAS X software.

Tl5000

TL5000 Ergo for fully automated tasks at high magnifications

With the TL5000 Ergo you can manage and control all base settings via software for maximum control, whatever your project. Manual push buttons on the base allow cycling through the different contrasts: brightfield, Rottermann contrast (from North and South), or double-sided darkfield. Reproduce imaging conditions from past projects with the store & recall function in the software

Leica LED200 & Leica 2500

– Leica LED2000 illumination system was developed for the Leica microscopes of the S series, M series and DMS series. The innovative incident illuminator consists of a 4-point ring illuminator and another arc illuminator for additional contrast. The compact design means the stand is easy to transport and takes up only a small amount of space. The versatile system has 4 preprogrammed illumination scenarios for incident light.
– Leica LED2500 illumination system was developed for the Leica microscopes of the S series, M series and DMS series.
It combines the stand with a bright incident light and transmitted light; the segments can be controlled jointly or individually. The stand is easy to transport and takes up only a small amount of space.

The 4 predefined incident light scenarios produce different contrasts and enable fast and convenient operation. With the transmitted light there is not only uniform transmitted illumination over a large area, but also a targeted transmitted light function. This makes it possible to view structures with low contrast.

Features:

– Illumination source Power: LEDs, 1.2 W each
– Illumination mode: Incident light (4-point ring illuminator & 3-point oblique illumination) | Transmitted light (only with Leica LED2500)
– Average lifespan of the LEDs: 25 000 hours
– Color temperature: 6100 K incident light | 5800 K transmitted light (only Leica LED2500)
– Cooling: Thermal management for LEDs, quiet and vibration-free
– Illumination control: Incident light and transmitted light are separately switchable
– Brightness control: 10 levels

Fiber Optic Led Cold Light Source Cls Series

Fiber optic LED Cold-light source CLS series

The Leica CLS LED light source has been developed for routine and high-end microscopy applications. It is compatible with all fiber-optic light guides of the LED series.
– Extended service life of approx. 25 000 h (70% of the output brightness), no lamp replacement required (no servicing costs, no storage costs for spare lamps)
– 70% energy savings
– Color temperature: 3 200 K (can be adjusted in direction of daylight using filter)
– Electronic shutter function

Motor Focus System For Stereomicroscopes Leica Motor Focus

Motor-Focus system for stereomicroscopes Leica Motor-Focus

The purpose of the Leica motor-focus system is to provide motor-driven coarse and fine focusing by means of a manual control, a footswitch, or through a computer. Five exact focus settings can be stored. Because of its modular design, the motor-focus system easily integrates with the incident-and transmitted-light stands of the Leica M125, M165 C, M205 A, M205 C, M165 FC and M205 FA stereomicroscopes.

Leica Swingarm Stands

Leica Swingarm Stands

Leica Swingarm Stands (boom stands) are ideal to handle large samples. The high modularity allows to customize these stands depending on sample size and weight of the configuration. Focus arms and drives provide multiple mounting options and more safety features.
Rack and pinion system of the “Large” version allows easy height positioning, even for heavy stereomicroscopes and grease-free parts prevent specimen contamination. Special vibration dampening feet for standard and large base plate actively absorbs vibration up to 50% compared to traditional feet.

Leica Flexarm Stand

Leica Flexarm Stand

The Leica Flexarm stand can rotate 360° and has a radius of up to one meter, making it highly mobile. This allows for convenient viewing of large samples, which should not or cannot be moved. This is ideal for inspection, assembly, and quality control in electronics manufacturing, in dental laboratories and many other applications.