Paraplast is recommended for general tissue embedding. It is composed of a refined mixture of highly purified paraffin containing plastic polymers of regulated molecular weights. This supports improved tissue infiltration and quality sections with minimal compression. Paraplast gives brittle, difficult to section tissue an innate elasticity, promoting wrinkle-free sections. Paraplast Plus is suggested for large tissue or tissue that may normally present infiltration issues. Paraplast Plus contains a small percentage of dimethyl sulfoxide (DMSO), allowing accelerated tissue penetration. Paraplast Xtra is recommended for lower temperature infiltration which aids in the prevention of tissue distortion. It is composed of a unique blend of low molecular weight polymers and highly purified paraffins for compression resistance and ribbon continuity. Low viscosity permits complete infiltration of dense tissue.

Parablocks ASP are pre-formed blocks of paraffin that are provided in plastic molds. The preformed blocks fit easily into the paraffin chamber of the ASP Tissue Processor. Once the chamber is filled with the solid paraffin blocks, there is no need for the technician to return later to determine the paraffin volume and add additional paraffin. Reduced risks since solid blocks eliminate pellet spills and the need to transfer molten paraffin.

Beveled Edge Slides feature beveled edges and corners that make for easier handling. The 25 mm x 75mm slides are washed and carefully inspected to ensure quality.

These slides are 3”x 1” White Snowcoat slides with two circles, each having a diameter of 1/2”. These circles match up with the Cytology Funnel, which is to be used for preparation of non-gyn cytology specimens.

X-tra Slides have a positive charged surface which helps to bond tissue sections and cytology preparations. X‐tra slides are used for demanding H&E procedures that require tissue adhesion. Size: 1” x 3” x .04” (unless otherwise noted) Hydrophobic surface with approximately 90-degree contact angle. Recommended uses include special stains, IHC, ISH, cryosectioning, and cytology.

Micro Cover Glass features the finest precleaned borosilicate glass, chosen for its uniform thinness and flatness. This non-corrosive non-fogging cover glass is packed on its edge in a lint-free, shock absorbing lining. Includes dessicant packets in each ounce box.Custom sizes available upon request. 1 Thinness: 0.13MM - 0.17MM 1.5 Thinness: 0.16MM - 0.19MM

X-tra Thermal Slides are adhesive slides that are optimized for use with thermal printers. Hydrophobic surface with approximately 90-degree contact angle. Recommended uses include special stains, IHC, ISH, cryosectioning, and cytology.

Products – Page 7 – DMI Medical USA

Q: Paraplast High Melt Paraffin

Paraplast High Melt embedding media is made from a combination of highly purified wax and plastic polymers of regulated molecular weights. Produced by the same manufacturers of Paraplast, Paraplast High Melt can be used for infiltration or embedding and offers reproducibility while sectioning.

Q: EM-400 Embedding Medium Paraffin

EM-400 Embedding Medium is a blend of purified paraffin with synthetic polymers that enables sectioning with minimal compression. The medium can facilitate routine sectioning at 1-2 microns on a rotary microtome. Its low melting point (56-57º C, water bath temperature 37-42º C) reduces potential artifactual distortion in tissues heated above 60º during paraffin impregnation. EM-400 will remain stable even at elevated temperatures. It is available in a case of 10 x 2 lb (0.91 kg) lightweight bags to facilitate handling.

Q: PELORIS Parablocks Paraffin

PELORIS Parablocks are pre-formed blocks of paraffin that are provided in plastic molds. The preformed blocks fit easily into the paraffin chamber of the PELORIS Tissue Processor and will melt faster than pellets or flakes. Once the chamber is filled with the solid paraffin blocks, there is no need for the technician to return later to determine the paraffin volume and add additional paraffin. Reduced risks since solid blocks eliminate pellet spills and the need to transfer molten paraffin. HistoCore PELORIS 3 Premium Tissue Processing System Premium Tissue Processing Leica PELORIS II

Q: NE-202 REFRIGERATION CABINET (2 BODIES-1 DOOR) NE-202B FREEZING CABINET

High density injected polyurethane foam Panel thickness 60mm (NE-202) Panel thickness 100mm (NE-202B) CFC Free Prismatic rails for sliding NE-202B: Freezing temperature: 0ºC to -20ºC NE-202: Programmable . Refrigeration Temperature 0ºC to 10 ºC Capacity: 2 bodies Internal and external stainless steel finished

Q: NE-203 REFRIGERATION CABINET (3 BODIES - 1 DOOR) NE-203B FREEZING CABINET

High density injected polyurethane foam Panel thickness 60mm (NE-203) Panel thickness 100mm (NE-203B) Free of CFC Prismatic rails for sliding NE-203B: Freezing temperature: 0ºC to -20ºC Programmable . NE-204: Refrigeration Temperature 0ºC to 10 ºC Capacity: 3 bodies

Q: NE-204 REFRIGERATION CABINET (4 BODIES - 2 DOORS) NE-204B FREEZING CABINET

High density injected polyurethane foam Panel thickness 60mm (NE-202) Panel thickness 100mm (NE-202B) Free of CFC Prismatic rails for sliding of the body tray NE-204B: Freezing temperature: 0ºC to -20ºC Programmable NE-204: Refrigeration Temperature 0°C to 10°C Capacity: 4 bodies Internal and external stainless steel finished

Q: NE-206 Preservation Chamber (6 BODIES - 2 DOORS) NE-206B FREEZING CABINET

High density injected polyurethane foam Panel thickness 60mm (NE-206) Panel thickness 100mm (NE-206B) Free of CFC Trays for liquid disposal Prismatic rails for sliding of the body tray NE-206 Programmable preservation temperature: 0ºC to -20ºC NE-206B & 0°C to -10°C NE-206 10ºC NE-206B Programmable freezing temperature: 0° to -20°C Capacity: 6 bodies