The EM ACE600 is a versatile high vacuum film deposition system, designed to produce very thin, fine-grained, and conductive metal and carbon coatings for the highest resolution analysis, as required for FE-SEM and TEM applications. This fully automated table-top coater includes an integrated oil-free pumping system, quartz crystal film thickness measurement and three axis motorized stage (rotation, optional tilt and height).

Producing homogenous and conductive metal or carbon coatings for SEM and TEM analysis was never more convenient than with the Leica EM ACE200 coating system. Configured as a sputter coater or carbon thread evaporation coater, perfectly reproducible results can be achieved in the fully automated system. If both methods are required for your analysis Leica Microsystems offers a combined instrument with interchangeable heads in one instrument. Various options as Quartz Crystal Measurement, Planetary Rotation, Glow Discharge, and Exchangeable Shielding complete this Low Vacuum Coater.

With Leica EM VCT500 you can transfer samples under cryogenic conditions or at room temperature as well as under vacuum or protected atmosphere.

The Leica TCS SPE is an affordable entry to the Leica family of confocals. It combines a straightforward design with high-end, true point-scanning confocal technology. The prism-based spectral detection – unique to all Leica confocal microscopes – and a highly dynamic photomultiplier offer extraordinary signal efficiency for gapless detection of even weak signals. A variety of robust solid-state lasers allow the use of a broad range of common dyes. The Leica TCS SPE confocal is a true point-scanning, spectral system at an affordable price for fluorescence imaging of live or fixed cells. With its small footprint , the Leica TCS fits in every laboratory at common room conditions. The Leica TCS SPE is the only confocal in its class that provides true spectral detection suitable for lambda scan.

the Leica DMi1 the perfect partner for your live cell laboratory. Use the S40 condenser for optimal resolution with slides, petri dishes, multi-well dishes, and most types of flasks: The S40 provides an extra 10 mm of free space by simply moving it up. The Leica DMi1 camera version is an all-in-one solution for image capturing and cell culture documentation. You can choose between 2.5- or 5.0-megapixels resolution. The camera is mounted at the back of the stand. No additional trinocular tube is needed

Products – Page 8 – DMI Medical USA

Q: ET-101/1 GROSSING STATION / 1 USER

ET-101 Series consists in a basic grossing station with all necessary features to satisfy any safety regulation. Its functions are controlled from the upper control panel. WORKING SURFACE Divided into two parts. 1 working area 600 x 500 mm 1 sink 400 x 400 x 250 mm. Fully automated formaldehyde dispenser 1 cold / hot mono-control faucet with clinical handle. Independent sink for formalin 120 x 120 mm Formalin dispenser faucet.

Q: ET-107-1 NEW GROSSING STATION

The grossing stations ET-100 SERIES form a family of products characterized by their flexibility of adaptation to space and the versatility of configuration. Special attention has been paid to the conception of the work place, in order to make the tasks of the laboratory more comfortable and safe. This allows the user to execute their work more efficiently.

Q: Critical Point Dryer Leica CPD300

Leica EM CPD300 Automated Critical Point Dryer Fully computer controlled with an integrated touch screen user interface (7 inch) - Fully automated, reproducible and controlled processes. - Reduced CO2 consumption and running cost with new Leica Filler concept. Automated: - Computer controlled parameters: Measurement of incoming CO2, temperature and pressure chamber cooling CO2 filling with three speed settings exchange steps with time settings heating to supercritical state with three speed settings gaseous CO2 drain with adjustable speed settings - Software: Protocol programming protocol store and recall calculation of complete process time software safety concept with temperature and pressure cut-off instructions for use and safety precautions (Manual version available an upgrade for complete automation) - Solvent resistant housing - High strength stainless steel specimen pressure chamber - Chamber lid with screw thread

Q: Leica AC20 | Automatic contrasting instrument for ultrathin sections

The Leica EM AC20 automatic contrasting system for ultrathin sections ensures minimum user contact with reagents and reduced reagent consumption. Usage of a peristaltic pump and non-contact valves allow the reagents to travel directly through tubing to the grid chamber, resulting in fast, high-quality double staining and easy maintenance

Q: Leica EM TP | Tissue Processor

The Leica EM TP is an instrument used for fixation and dehydration of samples for further treatment. It can be used for resin processing for electron microscopy (EM) and light microscopy (LM). The Leica EM TP consists of a base unit onto which an EM or LM processing outfit can be added. Interchange between EM or LM processing takes only moments. Reagents can be pre-loaded into the vials attached to the carousel in a fume cupboard. Toxic reagents can be sealed with individual vial caps before taking them over to the Leica EM TP. The TP chamber is also ventilated via a fume extraction system

Q: Leica EM RES102 | Ion Beam Milling System

Unique ion beam milling device with two modified saddle field ion sources of variable ion energy for optimum results. It combines the preparation of TEM, SEM, and LM samples in a single benchtop unit. A variety of sample holders allows a diverse range of applications to be carried out. In addition to high-energy ion beam milling, the Leica EM RES102 can also be used for very gentle sample processing using low ion energy.

Q: Leica EM TIC 3X | Ion Beam Milling System

The Triple Ion Beam Milling System, EM TIC 3X allows production of cross sections and planar surfaces for Scanning Electron Microscopy (SEM), Microstructure Analysis (EDS, WDS, Auger, EBSD) and AFM investigations. With the EM TIC 3X you achieve high quality surfaces of almost any material at room temperature or cryo, revealing the internal structures of the sample in a near native state as possible. the Leica EM TIC 3X can be configured for applications of standard preparation, high throughput processing, and the preparation of extremely heat sensitive samples such as polymers, rubbers, or even biological material at low temperatures. Samples can be transferred to the (cryo) SEM under cryo-vacuum condition

Q: Leica EM TRIM2 | Specimen Trimming Device for SEM TEM & LM

The Leica EM TRIM2 is a high-speed milling system with integrated stereomicroscope and LED ring illuminator for trimming of biological and industrial samples prior to ultramicrotomy. The Leica TRIM2 features a 1µm feed control for the milling cutter, perpendicular viewing of the embedded sample to determine position for accurate milling, and a superior extraction system with Hepa filter.

Q: Leica EM Rapid | Pharmaceutical Milling System for Pills

The Leica EM RAPID milling system for pharmaceutical research enables sample preparation for analysis of active ingredient distribution on solid-dose pharmaceuticals. The instrument, using a tungsten carbide or diamond miller, decapsulates pills without smearing and features adjustable cutting speeds between 300 and 20,000 rpm, defined step-layer removal, low-noise extraction, and filtration with a Hepa filter and single or multiple holders.

Q: Leica EM TXP | Target Surfacing System

The Leica EM TXP is a target preparation device for milling, sawing, grinding, and polishing samples prior to examination by SEM, TEM, and LM techniques. An integrated stereomicroscope allows pinpointing and easy preparation of barely visible targets. With the specimen pivot arm the sample can be observed directly at an angle between 0° and 60°, or 90° to the front face for distance determination with an eyepiece graticule